|Electrical Tools Names with Pictures|
Electrical Tools Names with Pictures | We should have to know names about important tools which is used in the electrical wiring works. Electrical tools with pictures and uses are described in this post. We use lot of tools in the electrical field but this time we are going to see important electrical tools which is used for electrical installation.
Important Electrical Tools Names with Pictures and Uses
1. Cutting Plier
2. Nose Plier
3. Wire Striper
4. Double End Spanner
5. Ring Spanner
6. Split Level
9. Rawal Jumper
10. Adjustable Spanner
11. Pipe Wrench
12. Electrical Knife
13. Grip Plier
14. Crimping Tool
15. Electrical Tester
16. Measurement Tape
17. Drilling Machine
18. Holesaw Cutter
19. Hacksaw Frame
|Screwdrivers - Measurement Tapes - Electrical Knife|
To complete the electrical works, we need a few specialty tools as well as a collection of basic hand tools. As with any tool purchase, invest in quality products when we buy tools for electrical work. We need to keep those clean, and sharpen or replace any cutting tools that have dull edges.
The materials used for electrical work have changed dramatically in the last 20 years, making it much easier for consumers to do their own electrical work. The following tools are used in the electrical wiring works.
Tool belt: To keep frequently used tools within easy reach.
Insulation Tapes: A material of electrical tapes in a variety of colors are used for marking wires and for attaching cables to a fish tape.
Cable Puller: Wire puller is useful for installing cables in finished wall cavities and for pulling wires through conduit. Products designed for lubrication reduce friction and make it easier to pull cables and wires.
Voltage Tester: Diagnostic tool is used to test a voltage or circuit.
Touchless Circuit Tester: To safely check wires for current and confirm that circuits are dead.
Plug-In Tester: To check receptacles for correct polarity, grounding, and circuit protection
Multimeter: To measure AC/DC voltage, AC/DC current, resistance, capacitance, frequency, and duty cycle.
Wire stripper: For removing a insulation from conductor, without losing conductor core.
Side cutters: For cutting wires
Screwdrivers: To tightening a screws. Multi-screwdriver set is used to tight a shape of star, plus, minus,hexagon or any other type of screws.
Electrical Knife: To cut a cable or in the cable termination process use.
Electrical Tool Box: To keep all the electrician tools in an one place.
Cutting Plier: It is used to cut a wires.
Nose Plier: In abnormal condition, we use this tool to cut a wires.
Split Level: To check a level of surface.
Adjustable Spanner: We can use this as a spanner.
Drilling Machine: To make holes with using drilling bit.
Holesaw Cutter: To make a big size of hole like 20 mm, 25 mm size in the steel or pvc.
Hacksaw Frame: To cut a steel or pvc.
Hope you understand this article about Important Electrical Tools Names with Pictures. Please share your experience through the comments. Your comment can help me to improve my post updates. And if you think my post was something worth reading, then please share it with your social media friends.